;====================================================================
; Suetron electronic GmbH
; W.Ebinger
; Kurze Strasse 29
; 70794 Filderstadt
; Tel.: 0711 / 77098-23
;====================================================================
; Gerätestammdaten-Datei:	SE03081A.GSD
; Version:							2.1 vom 10.04.2000
;====================================================================
; Geräteserie:		TesiMod-Bedienterminal
;							Maximale Eingabe-Datenlänge 32 Byte
;							Maximale Ausgabe-Datenlänge 32 Byte
; ===================================================================
;
#Profibus_DP
GSD_Revision        = 1
;
Vendor_Name         = "Suetron electronic GmbH"
Model_Name          = "TesiMod BT"
Revision            = "2.0"
Ident_Number        = 0x081A
Protocol_Ident      = 0
Station_Type        = 0
FMS_supp            = 0
Hardware_Release    = "V1.0"
Software_Release    = "V2.0"
;
9.6_supp            = 1
19.2_supp           = 1
93.75_supp          = 1
187.5_supp          = 1
500_supp            = 1
1.5M_supp           = 1
3M_supp             = 1
6M_supp             = 1
12M_supp            = 1
;
MaxTsdr_9.6         = 60
MaxTsdr_19.2        = 60
MaxTsdr_93.75       = 60
MaxTsdr_187.5       = 60
MaxTsdr_500         = 100
MaxTsdr_1.5M        = 150
MaxTsdr_3M          = 250
MaxTsdr_6M          = 450
MaxTsdr_12M         = 800
;
Redundancy          = 0
Repeater_Ctrl_Sig   = 2
24V_Pins            = 0
Implementation_Type = "SPC3"
;
Bitmap_Device			 = "TesiMod"
Bitmap_Diag				 = "TesiMod"  
Freeze_Mode_supp    = 0
Sync_Mode_supp      = 0
Auto_Baud_supp      = 1
Set_Slave_Add_supp  = 0
Min_Slave_Intervall = 5
;
Modular_Station     = 1
Max_Module          = 1
Max_Input_Len       = 32
Max_Output_Len      = 32
Max_Data_Len        = 64
Modul_Offset        = 0
;
Fail_Safe           = 0
Slave_Family        = 6
Max_Diag_Data_Len   = 12
;
Module = "8 Byte Daten E/A" 0x37
EndModule
;
Module = "12 Byte Daten E/A" 0x3B
EndModule
;
Module = "16 Byte Daten E/A" 0x3F
EndModule
;
Module = "20 Byte Daten E/A" 0xC0, 0x13, 0x13
EndModule
;
Module = "24 Byte Daten E/A" 0xC0, 0x17, 0x17
EndModule
;
Module = "28 Byte Daten E/A" 0xC0, 0x1B, 0x1B
EndModule
;
Module = "32 Byte Daten E/A" 0xC0, 0x1F, 0x1F
EndModule
;
Module = "8 Byte kons. Daten E/A" 0xB7
EndModule
;
Module = "12 Byte kons. Daten E/A" 0xBB
EndModule
;
Module = "16 Byte kons. Daten E/A" 0xBF
EndModule
;
Module = "20 Byte kons. Daten E/A" 0xC0, 0x93, 0x93
EndModule
;
Module = "24 Byte kons. Daten E/A" 0xC0, 0x97, 0x97
EndModule
;
Module = "28 Byte kons. Daten E/A" 0xC0, 0x9B, 0x9B
EndModule
;
Module = "32 Byte kons. Daten E/A" 0xC0, 0x9F, 0x9F
EndModule
;